Link ECU

spanerhed7 · spanerhed7

I've been looking at adding a knock sensor to my G4+ extreme, then saw this: G4 KnockLink is a self-calibrating, visual knock warning tool. The G4 KnockLink is the only detonation warning device on the market that requires no setup Has anyone tried it? Seems too good to be true! Seems to be a standal...

Charles Freeborn · Charles Freeborn

Can you give me a nudge in the right direction on which unit would be well suited to an air cooled porsche? It will be fuel injected & naturally aspirated. There currently is no trigger, so that would have to be integrated into the flywheel, fan pulley or distributor in some way. Many thanks in advan...

DonRX7 · DonRX7

Dear BOM (and forum members), I've been rebuilding my RX7 from the ground up, and the time has come to look for an adequate ECU. I found several, but none that was made specifically for a rotary engine, except for the G4 RX. My question is; Does anyone have experience with this particular ECU? It does se...

sleeper · sleeper

Hi, I am looking for a ECU options hoping you say you can do it. I am looking to use the 1.6 sigma engine branded as the Duratec 1.6 from the fiesta focus from a 2010 engine:The engine runs VCT. Are you able to run the ford VCT 4 cam sensor stuff w...

Topic		Started By	Replies	Views	Last Post
	Anyone tried the Link G4 Knock light? (Preview) I've been looking at adding a knock sensor to my G4+ extreme, then saw this: G4 KnockLink is a self-calibrating, visual knock warning tool. The G4 KnockLink is the only detonation warning device on the market that requires no setup Has anyone tried it? Seems too good to be true! Seems to be a standal...	spanerhed7	1	1359	April 9th by GrayRaceCat
	Porsche 6 cyl? (Preview) Can you give me a nudge in the right direction on which unit would be well suited to an air cooled porsche? It will be fuel injected & naturally aspirated. There currently is no trigger, so that would have to be integrated into the flywheel, fan pulley or distributor in some way. Many thanks in advan...	Charles Freeborn	2	3894	Dec 14, 2015 by Charles Freeborn
	Link G4 RX (Preview) Dear BOM (and forum members), I've been rebuilding my RX7 from the ground up, and the time has come to look for an adequate ECU. I found several, but none that was made specifically for a rotary engine, except for the G4 RX. My question is; Does anyone have experience with this particular ECU? It does se...	DonRX7	5	3207	Aug 24, 2015 by Trevor Australia

	Sigma/Duratec 1.6 engine (Preview) Hi, I am looking for a ECU options hoping you say you can do it. I am looking to use the 1.6 sigma engine branded as the Duratec 1.6 from the fiesta focus from a 2010 engine:The engine runs VCT. Are you able to run the ford VCT 4 cam sensor stuff w...	sleeper	1	3741	Jul 1, 2015 by Bad Obsession
Page 1 of 1 sorted by