Members Login
Post Info TOPIC: Episode 15


Senior Member

Status: Offline
Posts: 118
Date:
Episode 15
Permalink  
 


wonder and f we will see the completion of the mudguards wheel arches in episode 15 or if we are going to see some more plumbing?

i would imagine the interior will be about the last thing to be done so hopefully we shall see some work on the engine ancillaries...



__________________

Understeer is when you hit the wall with your front end.  Oversteer is when you hit the wall with your back end. Horsepower is how hard you hit the wall. Torque is how far you move the wall when you hit it!

+++ OUT OF CHEESE ERROR +++



Veteran Member

Status: Offline
Posts: 92
Date:
Permalink  
 

I expect they will finish the detail chassis fabrication so that the shell can go off for painting, and then concentrate on the engine. Tucking the turbo in somewhere, and easing the turbo waste pipe past the sump is going to be tricky. It will also need insulating from the sump, otherwise it will make an excellent oil heating system

__________________


Senior Member

Status: Offline
Posts: 118
Date:
Permalink  
 

Wonder if Nick will get his power steering fitted in there

__________________

Understeer is when you hit the wall with your front end.  Oversteer is when you hit the wall with your back end. Horsepower is how hard you hit the wall. Torque is how far you move the wall when you hit it!

+++ OUT OF CHEESE ERROR +++



Veteran Member

Status: Offline
Posts: 34
Date:
Permalink  
 

Perhaps the fat wheels and wide arches are a bluff, it's going to run around on lots of little legs.

__________________

- - - hot water, good dentishtry and shoft lavatory paper - - -



Senior Member

Status: Offline
Posts: 118
Date:
Permalink  
 

LOL

__________________

Understeer is when you hit the wall with your front end.  Oversteer is when you hit the wall with your back end. Horsepower is how hard you hit the wall. Torque is how far you move the wall when you hit it!

+++ OUT OF CHEESE ERROR +++



Senior Member

Status: Offline
Posts: 128
Date:
Permalink  
 

There's almost certainly more plumbing involved. There's also a fair amount of fabrication too; the old favourites return for one last hurrah before things turn fiddly.

__________________


Senior Member

Status: Offline
Posts: 108
Date:
Permalink  
 

Old favourites?

Speakers ? Battery?


...remote turbo in the boot???

:)

__________________


Veteran Member

Status: Offline
Posts: 64
Date:
Permalink  
 

"old favourites"  not Richard in a dress again!  Perhaps Nik getting another haircut?



__________________
GLP


Member

Status: Offline
Posts: 15
Date:
Permalink  
 

"old favourites"... does that mean you found more rust?

__________________


Senior Member

Status: Offline
Posts: 118
Date:
Permalink  
 

Plenty of CAD templates? Welding? SPEAKERS!

__________________

Understeer is when you hit the wall with your front end.  Oversteer is when you hit the wall with your back end. Horsepower is how hard you hit the wall. Torque is how far you move the wall when you hit it!

+++ OUT OF CHEESE ERROR +++



Senior Member

Status: Offline
Posts: 108
Date:
Permalink  
 

I know!!!!


TEA!

:D

__________________


Veteran Member

Status: Offline
Posts: 31
Date:
Permalink  
 

Fabrication of an exhaust cutout that at the flip of a cabin switch, re-routs the hot exhaust gasses to a air-to-water tea kettle.



-- Edited by Z_Karma on Thursday 5th of January 2017 01:05:41 AM

__________________
Metric in the streets, SAE in the sheets.


Senior Member

Status: Offline
Posts: 118
Date:
Permalink  
 

Z_Karma wrote:

Fabrication of an exhaust cutout that at the flip of a cabin switch, re-routs the hot exhaust gasses to a air-to-water tea kettle.



-- Edited by Z_Karma on Thursday 5th of January 2017 01:05:41 AM


 I reckon you are right on the money there!



__________________

Understeer is when you hit the wall with your front end.  Oversteer is when you hit the wall with your back end. Horsepower is how hard you hit the wall. Torque is how far you move the wall when you hit it!

+++ OUT OF CHEESE ERROR +++



Veteran Member

Status: Offline
Posts: 40
Date:
Permalink  
 

i hope its will have a auto shut off stat or it will be steam in seconds if the engine is doing anything over idle.

I have been following the progress and very impressed with the engineering even if at times its a bit ott ,(if its worth doing do it right)

keep up the good work (faster please)

ps happy new year to all from scotland



__________________


Senior Member

Status: Offline
Posts: 112
Date:
Permalink  
 

It is Friday the 13th. This would be a great opportunity to post the next episode. :)

__________________

"There is also some pretty crazy people here too, and aiming for the top of that tree is Bad Obsession Motorsport."
"They say it can't be done, they might be right"



Veteran Member

Status: Offline
Posts: 40
Date:
Permalink  
 

hello are there any news on what's happening , when we can expect the next video even a taster???.
keep it good

thanks in advance rickie

__________________


Member

Status: Offline
Posts: 15
Date:
Permalink  
 

Yes! We need more Binky awesomeness! I have re-watched the first 14 episodes so many times YouTube has sent me a therapist! (As reruns go they ate still bloody awesome!)

__________________


Veteran Member

Status: Offline
Posts: 31
Date:
Permalink  
 

I was late to the game and binge watched the first 13 episodes over a weekend just before episode 14 was released.

I've been having withdrawals so badly that i actually *gasp* started working on my own cars...somehow i managed to get another one running.

__________________
Metric in the streets, SAE in the sheets.


Senior Member

Status: Offline
Posts: 128
Date:
Permalink  
 

We're working on 15 now. Few weeks yet, sorry.

__________________


Veteran Member

Status: Offline
Posts: 31
Date:
Permalink  
 

Bad Obsession wrote:

We're working on 15 now. Few weeks yet, sorry.


 Alright...but if i make any more progress and get this beast past registration, it'll be your fault. 



__________________
Metric in the streets, SAE in the sheets.


Senior Member

Status: Offline
Posts: 112
Date:
Permalink  
 

Bad Obsession wrote:

We're working on 15 now. Few weeks yet, sorry.


Very nice, very nice. What do those lines mean? 



__________________

"There is also some pretty crazy people here too, and aiming for the top of that tree is Bad Obsession Motorsport."
"They say it can't be done, they might be right"



Senior Member

Status: Offline
Posts: 108
Date:
Permalink  
 

Bad Obsession wrote:

We're working on 15 now. Few weeks yet, sorry.


 In my book there are degrees of timescale

"a few weeks" being one down from "a couple of months" but one up from "a week or two"

so I'm thinking... mid march?



-- Edited by Forsh on Sunday 12th of February 2017 03:07:34 PM

__________________


Senior Member

Status: Offline
Posts: 112
Date:
Permalink  
 

Forsh wrote:
Bad Obsession wrote:

We're working on 15 now. Few weeks yet, sorry.


 In my book there are degrees of timescale

"a few weeks" being one down from "a couple of months" but one up from "a week or two"

so I'm thinking... mid march?



-- Edited by Forsh on Sunday 12th of February 2017 03:07:34 PM


 It was posted January 25th so (please wait while I take my socks off) 20 days and more has passed so it should be posted tonight. 



__________________

"There is also some pretty crazy people here too, and aiming for the top of that tree is Bad Obsession Motorsport."
"They say it can't be done, they might be right"



Member

Status: Offline
Posts: 22
Date:
Permalink  
 

6 days without being teased?

all the tension will get lost

__________________

Thats fishy!



Senior Member

Status: Offline
Posts: 128
Date:
Permalink  
 

Hope to finish filming the episode this weekend.

__________________


Senior Member

Status: Offline
Posts: 108
Date:
Permalink  
 

Woohoo!

3 weeks in the editing suit and I might not be far off with my mid March prediction!

:)

__________________


Veteran Member

Status: Offline
Posts: 92
Date:
Permalink  
 

"3 weeks in the editing suit"

I can't imagine NIk wearing a suit, let alone doing so for 3 weeks.

__________________


Veteran Member

Status: Offline
Posts: 40
Date:
Permalink  
 

we are waiting not too patiently and looking forward to seeing what you have been up to since the last gripping video.
have you had any thoughts on your next project as this one must be nearly finished ???

keep up the good work

__________________


Senior Member

Status: Offline
Posts: 108
Date:
Permalink  
 

Kiwi Paul wrote:

"3 weeks in the editing suit"

I can't imagine NIk wearing a suit, let alone doing so for 3 weeks.


 oh I don't know...

 

 

biggrin



-- Edited by Forsh on Monday 27th of February 2017 05:56:30 PM

__________________


Veteran Member

Status: Offline
Posts: 31
Date:
Permalink  
 

GAH!.. i looked up.

__________________
Metric in the streets, SAE in the sheets.


Senior Member

Status: Offline
Posts: 118
Date:
Permalink  
 

Yup! Can't UN-ring that bell can we.

__________________

I am not a control FREAK, I am a control ENTHUSIAST!



Senior Member

Status: Offline
Posts: 108
Date:
Permalink  
 

Don't blame me!

Kiwi Paul made me do it!

 



__________________


Veteran Member

Status: Offline
Posts: 92
Date:
Permalink  
 

Yep, I have highly developed powers of mind control. Don't nobody cross me, you will regret it....

__________________


Member

Status: Offline
Posts: 19
Date:
Permalink  
 

but wouldn't that mean that if someone crossed you, you'd have forced them to do so?  

 

 



__________________
Doing it all wrong since 1966


Senior Member

Status: Offline
Posts: 118
Date:
Permalink  
 

Friday 17th - yaaay!

__________________

Understeer is when you hit the wall with your front end.  Oversteer is when you hit the wall with your back end. Horsepower is how hard you hit the wall. Torque is how far you move the wall when you hit it!

+++ OUT OF CHEESE ERROR +++



Senior Member

Status: Offline
Posts: 108
Date:
Permalink  
 

The Chief Smeg wrote:

Friday 17th - yaaay!


 

biggrin



__________________


Veteran Member

Status: Offline
Posts: 75
Date:
Permalink  
 

1 week Ladies
just pray its a good one

__________________

It's only a flesh wound



Member

Status: Offline
Posts: 14
Date:
Permalink  
 

Woo hoo!

__________________


Veteran Member

Status: Offline
Posts: 92
Date:
Permalink  
 

Where do you get this from?


The Chief Smeg wrote:

Friday 17th - yaaay!



 



__________________


Newbie

Status: Offline
Posts: 4
Date:
Permalink  
 

I received an email from BOM with the info. Patreons get it Thursday, wider release on Friday.



__________________


Senior Member

Status: Offline
Posts: 118
Date:
Permalink  
 

Kiwi Paul wrote:
Where do you get this from?


The Chief Smeg wrote:

Friday 17th - yaaay!



 


 The BOM Home page.wink



__________________

I am not a control FREAK, I am a control ENTHUSIAST!



Member

Status: Offline
Posts: 18
Date:
Permalink  
 

11 more hours....

__________________


Veteran Member

Status: Offline
Posts: 75
Date:
Permalink  
 

you mean 12 more hours? right?

__________________

It's only a flesh wound



Senior Member

Status: Offline
Posts: 118
Date:
Permalink  
 

5 and counting!!



__________________

I am not a control FREAK, I am a control ENTHUSIAST!



Senior Member

Status: Offline
Posts: 108
Date:
Permalink  
 

03:24

:D

__________________


Member

Status: Offline
Posts: 22
Date:
Permalink  
 

I just realized im in gmt+1, so its 9 o clock... Still 25 minutes... Im exited..

__________________

Thats fishy!



Senior Member

Status: Offline
Posts: 108
Date:
Permalink  
 

www.adweek.com/core/wp-content/uploads/files/news_article/guinness_surfer.jpg">

:)



-- Edited by Forsh on Friday 17th of March 2017 07:59:48 PM

__________________


Veteran Member

Status: Offline
Posts: 40
Date:
Permalink  
 

was worth the wait YES YES YES.
its looking good and well up to standard .
will it be finished this year ?????

more power to the both of you to get it all done

__________________


Member

Status: Offline
Posts: 17
Date:
Permalink  
 

excellent as always

 

how much further do you think you would have progressed if the filming hadn't taken place and how different do the think the build could have been?

 

keep up the good work and looking forward to the next instalment.

 

 



__________________


Senior Member

Status: Offline
Posts: 118
Date:
Permalink  
 

Was a good episode, everything is just so neat. "PTO" Outstanding!

__________________

Understeer is when you hit the wall with your front end.  Oversteer is when you hit the wall with your back end. Horsepower is how hard you hit the wall. Torque is how far you move the wall when you hit it!

+++ OUT OF CHEESE ERROR +++

1 2  >  Last»  | Page of 2  sorted by
 
Quick Reply

Please log in to post quick replies.

Tweet this page Post to Digg Post to Del.icio.us